Fanghuzhai 于 2000/05/30 18:02:43 发表在 汉英
It is interesting to read the previous posting on "jianfei" and "shoushen". The second is especially funny. Why? because it reflects the fat-phobia mentality. Those who have decided to reduce their fat (lose weight) are already doing something that is good according to current social tastes, yet they are not satisfied. They do not want to feel sinful for the fact that they do have some fat to cut down on, so they invented the other term: "shoushen," implying that they do not have any fat to reduce,but have decided to ADD to their already perfect fat-less bodies by making them slimer and more in shape.
By the way, my computer has a CD-ROM drive installed and it worked well, but recently, the CD drive icon is gone and when I try to use CD, it says "No CD-ROM is attached to your computer." Any master knows what's the problem?
[ 回应主贴 ]
[ 返回论坛 ]
跟贴目录:
Maybe it's a hardware connection problem?
作者:古月 - 2000/05/30 19:30:37
***
[ 回应此贴 |
查看原贴 ]
您到DOS提示符下,用DOS命令尝试进入光驱。
作者:游击队员 - 2000/05/30 20:46:05
***
再到Control Panel去,看看System中有没有CD的适配器,然后再定夺。
[ 回应此贴 |
查看原贴 ]
对不起, 我是电脑盲, DOS进CD 指令是怎么写的?
作者:方壶斋 - 2000/05/31 14:18:49
***
控制板里的多媒体下, 没有显示CD驱动器, 我想这和"我的电脑"下没有CD DRIVE 的图象是一回事.我借了一本<<傻瓜修电脑>>, 但如有名医指点更好. 多谢.
[ 回应此贴 |
查看原贴 ]
跟A、C、D、E、F一样。
作者:YJDY - 2000/05/31 14:27:44
***
就跟您进A:一样。
如果能找到,那你就到SYSTEM,不是“多媒体”去看ADAPTOR,一般来说,此时的CD-ROM适配器会有个问号或叹号,把适配器删掉。重新启动,让WIN9X自己重新构造驱动程序。
[ 回应此贴 |
查看原贴 ]
老师,您先到楼下照学生说的,搞清楚是硬件还是软件问题。要不,您告诉我丢掉CDROM驱动号之前做了些什么?比如装了些什么硬件,或软件之类?
作者:Last Hermit - 2000/06/01 09:10:39
***
---------------------------
Meunique
[ 回应此贴 |
查看原贴 ]
The Story of My Computer
作者:Fanghuzhai - 2000/06/01 22:00:45
***
The computer was given to me by a student. It has a problem: 127 motherboard problem. It is IBM Aptiva, 2 GB, 1.6 RAM. Another student loaded Windows 95 into it. I use Bluelight free internet service to go on line. All this worked fine.
One day student 2 was helping student 3 to fix his hard drive and he borrowed my CD drive for the job. Then they put the CD drive back.
Everything works fine except when I start the computer, there is a message saying something has been changed and ask me if I acknowledge the change. I asked student 2, who said yes.
I never used CD till Memorial Sunday and found it did not work. Student 2 checked the connection. No problem. In the set up page, it says CD installed. But the icon of CD drive is not there and CD player cannot run the drive.
Today, alas, disaster happened. I showed the following instruction to student 2, who said it makes more sense. He helped me to do the fixing but still the icon did not show up and the CD-ROM is said to be not attached. He changed something else, too fast I did not see clearly and reboot. This time, windows 95 simply locked and all I can see now is the blue Windows 95 face.
In the afternoon, student 2 did not come as he promised. I found a Windows 97 start up disk in my colleague's drawer and put it in the a drive and reboot the computer to see if I can get a c prompt. And I got some meaning message:
C:\MTM/MTMCDAI.SYS missing, error in CONFIG.SYS ON LINE 4
a:\>MSCDEX.GXE/D:ODEMCDOO1/L:D D:ODEMCD001 NOT FOUND, NO VALID CDROM
So I believe it is software problem.
The bad thing is that they are graduating and busy with packing etc and have little time to help me fix this. Who knows.
Same bad luck with another 486 computer. Windows 3.1 worked fine until student 2 told me that he could upgrade it. He took the hard drive home and then took it back saying his computer could not communicate with it. I put the hard drive back and got frequently harddrive not initializing message. This afternoon, after trial and error, I finally can make it do DOS editor job, but the windows does not start. At first it does not start, later I copied the above said Wind 97 start up disk's files into the C drive and now I can get windows 3.1 blue face and then it says failure to read drive c.
I do wish to make the Aptiva work. The 486 thing is a junk and does not matter.
[ 回应此贴 |
查看原贴 ]
老师,您在哪所学校任教?学生这就去上一下蒙托福题最牛的托福班,考它个650什么的,然后三个自愿全填老师那所学校,这样学生可以亲聆老师教诲!
作者:Last Hermit - 2000/06/02 08:09:22
***
It seems that you can't get any further than the DOS prompt. Then, I would recommend you sending me both of the files "autoexec.bat" and "config.sys", which are all under the root folder of drive C(C:\), as I would have to modify them while sending you a CD-ROM driver, which is a must for you to reinstall Windows 95 OSR2(commonly known as "Windows 97).
My e-mail: lasthermit@126.com Attention: input Last Hermit in the Recipient field, otherwise you'll get a retun mail blaming you for sending me spams, or unsolicited emails.
---------------------------
Meunique
[ 回应此贴 |
查看原贴 ]
Thanks for all the advice.
作者:Fanghuzhai - 2000/06/02 20:08:33
***
The place where I teach is not for civilians, but for service people. It is government. I only teach Chinese here. You guys all speak very good Chinese.
[ 回应此贴 |
查看原贴 ]
可是,学生对宋词一窍不通,您那绝学能否教教我?
作者:Last Hermit - 2000/06/02 23:49:19
***
---------------------------
Meunique
[ 回应此贴 |
查看原贴 ]
您检查一下CDROM的跳线情况。一般拆了又装回来不会出现这种情况,那学生可能动了您光驱的Jumpers。
作者:游击队员 - 2000/06/02 09:59:41
***
[ 回应此贴 |
查看原贴 ]
对!光驱上面有一个指示图,教您如何接跳针。有四种方式:接成“Primary Master”、“Primary Slave”、“Secondary Master”和“Secondary Slave”。老师可先去看看是何种方式……
作者:Last Hermit - 2000/06/02 11:05:04
***
然后,启动机器,当出现上有许多如CPU是什么,RAM有多少等参数的方框时,则按“Num Lock”指示灯左边的“Pause”,然后看看CDROM所在那行是属于上述哪种方式。务使CDROM的连接方式与屏幕显示的一样。
---------------------------
Meunique
[ 回应此贴 |
查看原贴 ]
您到DOS提示符下,用DOS命令尝试进入光驱。
作者:游击队员 - 2000/05/30 20:51:14
***
再到Control Panel去,看看System中有没有CD的适配器,然后再定夺。
[ 回应此贴 |
查看原贴 ]
对不起,诸位,减肥妙方要加工成品,尚需一段时间,请各位耐心等候,并请密切留意,不日隆重上市!不过,减肥药卖不成,暂时先学人卖卖电脑……
作者:Last Hermit - 2000/05/31 12:23:46
***
Any master knows WAHT THE PROBLEM IS?
Do the following to see if it's a hardware problem that caused the vanishing:
1)Click Start/Shut Down/Dos Prompt
2)Type config.sys, and check to see if there's a line says something like "device=C:\path name\driver name/d:cd00001", where "cd0001" is the name of the cdrom drive, and could be something else alternatively. Then, type "mscdex /d:cd0001", or replace "cd0001" with what you see on the screen, i.e. the name of your cdrom drive. However, if such a line is not found, then,
3)Reboot Windows 98, and open Notepad, click File/Open, browse to find the file "config.sys" under C:\
4)Add a new line just underneath of the last line by press ENTER at the end of it: Device=C:\windows\command\ebd\oakcdrom.sys /d:Teacher Then, save the file to exit.
5)Click Start/Shut Down/Dos prompt
6)Type "mscdex /d:teacher". If you can't find a cdrom drive, then it could mostly attribute to a hardware problem.
---------------------------
Meunique
[ 回应此贴 |
查看原贴 ]
[ 跟贴目录 ] [ 返回论坛 ]